dmesg - first run
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-96-generic (buildd@lcy01-09) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #143-Ubuntu SMP Mon Aug 29 20:15:20 UTC 2016 (Ubuntu 3.13.0-96.143-generic 3.13.11-ckt39)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000070975fff] usable
BIOS-e820: [mem 0x0000000070980000-0x000000007f0acfff] usable
BIOS-e820: [mem 0x000000007f0ad000-0x000000007f121fff] reserved
BIOS-e820: [mem 0x000000007f122000-0x000000007f1cffff] usable
BIOS-e820: [mem 0x000000007f1d0000-0x000000007f44afff] ACPI NVS
BIOS-e820: [mem 0x000000007f44b000-0x000000007f64afff] reserved
BIOS-e820: [mem 0x000000007f64b000-0x000000007f7fffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Supermicro SYS-5038MA-H24TRFG-ON002/A1SA2-2750F, BIOS 1.0b 08/11/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 080000000 mask F80000000 uncachable
1 base 280000000 mask F80000000 uncachable
2 base 300000000 mask F00000000 uncachable
3 base 400000000 mask C00000000 uncachable
4 base 800000000 mask 800000000 uncachable
5 base 07F800000 mask FFF800000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6d0-0x000fd6df] mapped at [ffff8800000fd6d0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
[mem 0x27fe00000-0x27fffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
[mem 0x27c000000-0x27fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x27bffffff]
[mem 0x200000000-0x27bffffff] page 2M
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x70975fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x707fffff] page 2M
[mem 0x70800000-0x70975fff] page 4k
init_memory_mapping: [mem 0x70980000-0x7f0acfff]
[mem 0x70980000-0x709fffff] page 4k
[mem 0x70a00000-0x7effffff] page 2M
[mem 0x7f000000-0x7f0acfff] page 4k
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x7f122000-0x7f1cffff]
[mem 0x7f122000-0x7f1cffff] page 4k
init_memory_mapping: [mem 0x7f64b000-0x7f7fffff]
[mem 0x7f64b000-0x7f7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x35afc000-0x36d75fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 000000007f229088 000094 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000007f22c688 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 000000007f2291b8 0034C9 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 000000007f448f80 000040
ACPI: FPDT 000000007f22c798 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SPMI 000000007f22c7e0 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: MCFG 000000007f22c820 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: WDAT 000000007f22c860 0001AC (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: UEFI 000000007f22ca10 000042 (v01 00000000 00000000)
ACPI: APIC 000000007f22ca58 000098 (v03 INTEL TIANO 00000001 MSFT 00000000)
ACPI: BDAT 000000007f22caf0 000030 (v01 00000000 00000000)
ACPI: HPET 000000007f22cb20 000038 (v01 INTEL 00000001 MSFT 01000013)
ACPI: SSDT 000000007f22cb58 0009F1 (v01 PmRef CpuPm 00003000 INTL 20120913)
ACPI: HEST 000000007f22d550 0000A8 (v01 INTEL AVOTON B 00000001 INTL 00000001)
ACPI: BERT 000000007f22d5f8 000030 (v01 INTEL AVOTON B 00000001 INTL 00000001)
ACPI: ERST 000000007f22d628 000230 (v01 INTEL AVOTON B 00000001 INTL 00000001)
ACPI: EINJ 000000007f22d858 000150 (v01 INTEL AVOTON B 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x00000000-0x27fffffff]
NODE_DATA [mem 0x27fff4000-0x27fff8fff]
[ffffea0000000000-ffffea0009ffffff] PMD -> [ffff880277600000-ffff88027f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x27fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0x70975fff]
node 0: [mem 0x70980000-0x7f0acfff]
node 0: [mem 0x7f122000-0x7f1cffff]
node 0: [mem 0x7f64b000-0x7f7fffff]
node 0: [mem 0x100000000-0x27fffffff]
On node 0 totalpages: 2093727
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 8077 pages used for memmap
DMA32 zone: 516870 pages, LIFO batch:31
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0e] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x70976000-0x7097ffff]
PM: Registered nosave memory: [mem 0x7f0ad000-0x7f121fff]
PM: Registered nosave memory: [mem 0x7f1d0000-0x7f44afff]
PM: Registered nosave memory: [mem 0x7f44b000-0x7f64afff]
PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff]
PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
PM: Registered nosave memory: [mem 0xfed1d000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88027fc00000 s81536 r8192 d20864 u262144
pcpu-alloc: s81536 r8192 d20864 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060989
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8141328K/8374908K available (7420K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 233580K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2400.001 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600004)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28614 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) CPU C2750 @ 2.40GHz (fam: 06, model: 4d, stepping: 08)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (38400.01 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7f1d0000-0x7f44afff] (2600960 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 18:04:12, date: 09/30/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 000000007f0c8518 000490 (v01 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000490 (v01 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: SSDT 000000007f0c6c98 0001FA (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0001FA (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: SSDT 000000007f0c8a18 00047A (v01 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00047A (v01 PmRef ApIst 00003000 INTL 20120913)
ACPI: SSDT 000000007f0c7d98 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0x280000000-0xfffffffff]
pci 0000:00:00.0: [8086:1f01] type 00 class 0x060000
pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400
pci 0000:00:01.0: reg 0x10: [mem 0xdf180000-0xdf19ffff 64bit]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:1f11] type 01 class 0x060400
pci 0000:00:02.0: reg 0x10: [mem 0xdf160000-0xdf17ffff 64bit]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400
pci 0000:00:03.0: reg 0x10: [mem 0xdf140000-0xdf15ffff 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000
pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600
pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000
pci 0000:00:13.0: reg 0x10: [mem 0xdf1ab000-0xdf1ab3ff 64bit]
pci 0000:00:14.0: [8086:1f41] type 00 class 0x020000
pci 0000:00:14.0: reg 0x10: [mem 0xdf120000-0xdf13ffff 64bit]
pci 0000:00:14.0: reg 0x18: [io 0xe060-0xe07f]
pci 0000:00:14.0: reg 0x20: [mem 0xdf1a4000-0xdf1a7fff 64bit]
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.1: [8086:1f41] type 00 class 0x020000
pci 0000:00:14.1: reg 0x10: [mem 0xdf100000-0xdf11ffff 64bit]
pci 0000:00:14.1: reg 0x18: [io 0xe040-0xe05f]
pci 0000:00:14.1: reg 0x20: [mem 0xdf1a0000-0xdf1a3fff 64bit]
pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320
pci 0000:00:16.0: reg 0x10: [mem 0xdf1aa000-0xdf1aa3ff]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601
pci 0000:00:18.0: reg 0x10: [io 0xe0b0-0xe0b7]
pci 0000:00:18.0: reg 0x14: [io 0xe0a0-0xe0a3]
pci 0000:00:18.0: reg 0x18: [io 0xe090-0xe097]
pci 0000:00:18.0: reg 0x1c: [io 0xe080-0xe083]
pci 0000:00:18.0: reg 0x20: [io 0xe020-0xe03f]
pci 0000:00:18.0: reg 0x24: [mem 0xdf1a9000-0xdf1a97ff]
pci 0000:00:18.0: PME# supported from D3hot
pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100
pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdf1a8000-0xdf1a801f]
pci 0000:00:1f.3: reg 0x20: [io 0xe000-0xe01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 02-03]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:03:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:00.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *7 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 6 *7 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 *10 11 12)
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x70976000-0x73ffffff]
e820: reserve RAM buffer [mem 0x7f0ad000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f1d0000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0003 (active)
system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:01: [mem 0x7f800000-0x7fffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0500-0x05fe] has been reserved
system 00:02: [mem 0xfed00000-0xfed3ffff] could not be reserved
system 00:02: [mem 0xfed50000-0xfedfffff] has been reserved
system 00:02: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:02: [mem 0xffa00000-0xffffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a10-0x0a1f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a40-0x0a4f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:02:00.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:02.0: PCI bridge to [bus 02-03]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0x280000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18920K (ffff880035afc000 - ffff880036d76000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7b0ad000-0x7f0ad000] (64MB) mapped at [ffff88007b0ad000-ffff88007f0acfff]
microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU2 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU3 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU4 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU5 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU6 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU7 sig=0x406d8, pf=0x1, revision=0x122
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1475258652.680:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15938
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
pcieport 0000:00:03.0: irq 42 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x3000020
intel_idle: v0.4 model 0x4D
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:16.0: EHCI Host Controller
ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:16.0: debug port 2
ehci-pci 0000:00:16.0: cache line size of 64 is not supported
ehci-pci 0000:00:16.0: irq 23, io mem 0xdf1aa000
ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-96-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:16.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5ce91a5f5a603a312b28b6e022cb5618e5dc44ed'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 0:696:90
rtc_cmos 00:03: setting system clock to 2016-09-30 18:04:13 UTC (1475258653)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 760K (ffff880001742000 - ffff880001800000)
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
usb 1-1: new high-speed USB device number 2 using ehci-pci
systemd-udevd[145]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:18.0: version 3.0
ahci 0000:00:18.0: irq 43 for MSI/MSI-X
ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:18.0: flags: 64bit ncq led clo pio deso sadm sds apst
dca service started, version 1.12.1
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m2048@0xdf1a9000 port 0xdf1a9100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xdf1a9000 port 0xdf1a9180 irq 43
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:00:14.0: irq 44 for MSI/MSI-X
igb 0000:00:14.0: irq 45 for MSI/MSI-X
igb 0000:00:14.0: irq 46 for MSI/MSI-X
igb 0000:00:14.0: irq 47 for MSI/MSI-X
igb 0000:00:14.0: irq 48 for MSI/MSI-X
igb 0000:00:14.0: irq 49 for MSI/MSI-X
igb 0000:00:14.0: irq 50 for MSI/MSI-X
igb 0000:00:14.0: irq 51 for MSI/MSI-X
igb 0000:00:14.0: irq 52 for MSI/MSI-X
igb 0000:00:14.0: irq 44 for MSI/MSI-X
igb 0000:00:14.0: irq 45 for MSI/MSI-X
igb 0000:00:14.0: irq 46 for MSI/MSI-X
igb 0000:00:14.0: irq 47 for MSI/MSI-X
igb 0000:00:14.0: irq 48 for MSI/MSI-X
igb 0000:00:14.0: irq 49 for MSI/MSI-X
igb 0000:00:14.0: irq 50 for MSI/MSI-X
igb 0000:00:14.0: irq 51 for MSI/MSI-X
igb 0000:00:14.0: irq 52 for MSI/MSI-X
usb 1-1: New USB device found, idVendor=8087, idProduct=07db
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: HGST HTE721010A9E630, JB0OA3M0, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HGST HTE721010A9 JB0O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
igb 0000:00:14.0: added PHC on eth0
igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:00:14.0: eth0: PBA No: 010100-000
igb 0000:00:14.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:00:14.1: irq 53 for MSI/MSI-X
igb 0000:00:14.1: irq 54 for MSI/MSI-X
igb 0000:00:14.1: irq 55 for MSI/MSI-X
igb 0000:00:14.1: irq 56 for MSI/MSI-X
igb 0000:00:14.1: irq 57 for MSI/MSI-X
igb 0000:00:14.1: irq 58 for MSI/MSI-X
igb 0000:00:14.1: irq 59 for MSI/MSI-X
igb 0000:00:14.1: irq 60 for MSI/MSI-X
igb 0000:00:14.1: irq 61 for MSI/MSI-X
igb 0000:00:14.1: irq 53 for MSI/MSI-X
igb 0000:00:14.1: irq 54 for MSI/MSI-X
igb 0000:00:14.1: irq 55 for MSI/MSI-X
igb 0000:00:14.1: irq 56 for MSI/MSI-X
igb 0000:00:14.1: irq 57 for MSI/MSI-X
igb 0000:00:14.1: irq 58 for MSI/MSI-X
igb 0000:00:14.1: irq 59 for MSI/MSI-X
igb 0000:00:14.1: irq 60 for MSI/MSI-X
igb 0000:00:14.1: irq 61 for MSI/MSI-X
usb 1-1.3: New USB device found, idVendor=0557, idProduct=7000
usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.3:1.0: USB hub found
hub 1-1.3:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 2399.999 MHz
EXT4-fs (sda2): INFO: recovery required on readonly filesystem
EXT4-fs (sda2): write access will be enabled during recovery
igb 0000:00:14.1: added PHC on eth1
igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:00:14.1: eth1: PBA No: 010100-000
igb 0000:00:14.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
usb 1-1.3.1: new low-speed USB device number 4 using ehci-pci
systemd-udevd[147]: renamed network interface eth0 to em1
systemd-udevd[149]: renamed network interface eth1 to em2
usb 1-1.3.1: New USB device found, idVendor=0557, idProduct=2419
usb 1-1.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 0557:2419 as /devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input2
hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:16.0-1.3.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/input/input3
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:16.0-1.3.1/input1
random: nonblocking pool is initialized
Switched to clocksource tsc
EXT4-fs (sda2): recovery complete
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (217) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (233) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (235) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (236) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 3999740k swap on /dev/sda3. Priority:-1 extents:1 across:3999740k FS
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): em2: link is not ready
systemd-udevd[338]: starting version 204
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:07: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:07: Found new BMC (man_id: 0x002a7c, prod_id: 0x0828, dev_id: 0x20)
ipmi_si 00:07: IPMI kcs interface initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ismt_smbus 0000:00:13.0: irq 62 for MSI/MSI-X
type=1400 audit(1475258660.065:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=484 comm="apparmor_parser"
type=1400 audit(1475258660.065:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=484 comm="apparmor_parser"
type=1400 audit(1475258660.065:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=484 comm="apparmor_parser"
type=1400 audit(1475258660.065:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=483 comm="apparmor_parser"
type=1400 audit(1475258660.065:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
type=1400 audit(1475258660.065:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
type=1400 audit(1475258660.065:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=484 comm="apparmor_parser"
type=1400 audit(1475258660.065:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=484 comm="apparmor_parser"
type=1400 audit(1475258660.065:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=483 comm="apparmor_parser"
type=1400 audit(1475258660.065:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=483 comm="apparmor_parser"
[drm] Initialized drm 1.1.0 20060810
[drm] AST 2300 detected
[drm] dram 1632000000 1 16 01000000
[TTM] Zone kernel: Available graphics memory: 4081528 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
ast 0000:03:00.0: fb0: astdrmfb frame buffer device
ast 0000:03:00.0: registered panic notifier
[drm] Initialized ast 0.1.0 20120228 for 0000:03:00.0 on minor 0
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
igb: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
init: failsafe main process (526) killed by TERM signal
audit_printk_skb: 24 callbacks suppressed
type=1400 audit(1475258671.749:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=832 comm="apparmor_parser"
type=1400 audit(1475258671.749:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 comm="apparmor_parser"
type=1400 audit(1475258671.749:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser"
type=1400 audit(1475258671.749:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=832 comm="apparmor_parser"
type=1400 audit(1475258671.749:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser"
type=1400 audit(1475258671.753:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=832 comm="apparmor_parser"
type=1400 audit(1475258671.801:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/named" pid=833 comm="apparmor_parser"
type=1400 audit(1475258671.829:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=835 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
init: emby-server main process (8023) terminated with status 143
type=1400 audit(1475502859.740:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=2296 comm="apparmor_parser"
type=1400 audit(1475503000.583:29): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/mysqld" pid=2437 comm="apparmor_parser"
init: emby-server main process (23101) terminated with status 143
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
xor: measuring software checksum speed
prefetch64-sse: 8205.000 MB/sec
generic_sse: 7384.000 MB/sec
xor: using function: prefetch64-sse (8205.000 MB/sec)
raid6: sse2x1 801 MB/s
raid6: sse2x2 1028 MB/s
raid6: sse2x4 1690 MB/s
raid6: using algorithm sse2x4 (1690 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 1
Btrfs loaded